Résultats: 61 - 70 de 203
Crescendo X network connection is addressed in a separate document. The following information only addresses the original Crescendo (which does not include Play-fi technology). PROBLEMS CONNECTING TO YOUR LOCAL AREA NETWORK? If you are experiencing problems connecting your speaker...
Created: Dec 04 2015 | Updated: Aug 24 2018
In order to connect and use Bluetooth, the speaker must first be set to the Bluetooth input (the front LED will be blue). Set your speaker to Bluetooth mode. Use the speaker’s remote control to select Bluetooth, or repeatedly press the input button on front of the speaker until...
Created: Dec 04 2015 | Updated: Aug 24 2018
Please note, the Crescendo X is not able to stream audio from an iOS device over a wired USB connection. This document relates only to the original Crescendo Compatible iOS devices, when connected via a USB cable, can send music to your speaker using the USB input. In addition,...
Created: Dec 04 2015 | Updated: Aug 24 2018
Bravado The Bravado has left and right stereo inputs by way of a 3.5mm stereo (headphone style) plug. Just plug in an external device and change the input using the source button (should turn blue). If your output device has left/right RCA outputs, you will need to use a 3.5mm...
Created: Dec 04 2015 | Updated: Aug 24 2018
Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust. Do not spray any kind of cleaning agent on or in close proximity to the device.
Created: Dec 04 2015 | Updated: Aug 24 2018
We have no favorites and use electronics and cables quite interchangeably. We would suggest listening to a number of brands—and above all else—trust your ears. Dealers are always the best source for information when purchasing additional audio equipment. With regards to routers,...
Created: Dec 04 2015 | Updated: Aug 24 2018
The cables included with the wireless audio device are intended to get you started. Cables included with your wireless audio device vary by model. You may find it necessary to augment your system with additional cables or replace the included cables with cables of different...
Created: Dec 07 2015 | Updated: Aug 24 2018
Bravado The grille cover is not removable. Cadence The grille cover is not removable. Crescendo and Crescendo X To remove the grille cover from the speaker use a finger to firmly apply pressure to either corner of the grille. Motion Vision X The...
Created: Dec 07 2015 | Updated: Aug 24 2018
Try any (or all) the following recommendations and see if speaker begins responding as expected: Turn the wireless audio device off using the power button. Wait thirty seconds and turn the speaker back on. Unplug the speaker, wait thirty seconds, plug it back in, and turn...
Created: Dec 07 2015 | Updated: Aug 24 2018
Flashing purple indicates the speaker is set to Wireless/Ethernet input, but no network is detected. If connected via an Ethernet cable, check to make sure the cable is attached to a router and that the router is functioning properly. If connected via Wi-Fi, make sure your...
Created: Dec 07 2015 | Updated: Mar 20 2018