ヘルプ記事

« Back to Support Page

答え:

Results: 181 - 190 の 203

  • My receiver has one sub output jack, but my sub has two (or three) inputs. Which input should I use?

    In most installations you will connect the receiver/processor's sub output to the susbwoofer's LFE In (or Right In/LFE In inc ase of some models). MartinLogan subs offer flexible connection options to accomodate other scenarios. These are all outlined in the "Connecting the Subwoofer...

    Created: Jul 17 2018 | Updated: Aug 24 2018

  • My receiver has a room correction system. Should I still use the subwoofer or speaker's built-in room correction?

    The ARC (Anthem Room Correction) or PBK (Perfect Bass Kit) room correciton system in your MartinLogan subwoofers and electrostatic speakers is not a replacement for room correction systems designed to optimize multi-channel audio systems across the entire frequency range. When beginning...

    Created: Jul 17 2018 | Updated: Aug 24 2018

  • Troubleshooting Your Subwoofer

    No Output Check that all components are plugged in and turned on. Check all interconnecting cables. Check that the subwoofer is connected to the sub out (or other appropriate output) on the receiver/processor/amplifier. Check that subwoofer output is enabled in the receiver/processor's...

    Created: Jul 17 2018 | Updated: Aug 24 2018

  • What sampling rates do MartinLogan soundbars support?

    Motion Vision and Motion Vision X soundbars support an input rate up to 24-bit/96kHz Cadence & Verse soundbars support an input rate up to 24-bit/192kHz

    Created: Jul 30 2018 | Updated: Aug 24 2018

  • Do Motion Vision and Vision X have a high-pass when a subwoofer is connected?

    Motion Vision and Motion Vision X redirect the LFE signal to the subwoofer when one is connected to the soundbar. Make sure to use the soundbar's menu to tell it that a soundbar is connected. The Vision does not implement an additional high-pass when the subwoofer is engaged....

    Created: Aug 07 2018 | Updated: Aug 24 2018

  • How do I run ARC (Anthem Room Correction) on my Dynamo subwoofer?

    The information on this page pertains the the following ARC compatible products Dynamo 1600X Dynamo 1100X Dynamo 800X Dynamo 600X ARC Mobile (iOS) Download ARC Mobile from the iOS App Store Check to make sure your subwoofer is powered on and set to "App"...

    Created: Aug 27 2019 | Updated: Aug 27 2019

  • MartinLogan's Perfect Bass Kit - Get the Best Sound From Your ML Subwoofer

    Even when a MartinLogan subwoofer is ideally placed, the dynamics of each listening environment present a unique challenge for bass performance. The Perfect Bass Kit (PBK) learns vital information about your unique space, transforming the subwoofer's performance for perfect bass,...

    Created: Aug 24 2018 | Updated: Aug 24 2018

  • Subwoofer Setup & Optimization - MartinLogan

    A good subwoofer should disappear into the room, integrating with your music and movies instead of sticking out and being overly powerful. With this video you'll learn how to place a sub in your room and adjust the settings to blend seamlessly into your system for a better listening...

    Created: Aug 24 2018 | Updated: Aug 24 2018

  • ESL Setup and Optimization

    Devin Zell, Kenna LaRue and Justin Bright explain and demonstrate how to set up, optimize and enjoy your MartinLogan ESL loudspeakers.

    Created: Aug 24 2018 | Updated: Aug 24 2018

  • Basic Room Acoustics with Electrostatic Speakers

    Peter Soderberg from MartinLogan explains some basic principles of room acoustics and how electrostatic speakers interact with a common room. Near field, side-wall, back-wall, ceiling and floor reflections are each discussed, and we take a look at how MartinLogan's unique dipole characteristics...

    Created: Aug 24 2018 | Updated: Aug 24 2018

妥協のないパフォーマンス明瞭な精度揺るぎない信頼性静電気の原理の無数の技術的な利点を利用して、真の形式で音を再現します。これがMartinLoganのすべてです。