Results: 21 - 30 の 203
Rebooting your wireless audio device will force it to reconnect to your network. Bravado Press and hold the power button for 3 seconds. The reset tone will sound once. This reboot will cycle the power off and on and force the wireless audio device to reconnect to your...
Created: Sep 28 2015 | Updated: Aug 24 2018
Assigning a static IP is a relatively simple way to make sure that your app is always able to locate your wireless audio device. Every router is different but there are often tutorials online.First you should make a note of the MAC address of each of your wireless audio devices. This...
Created: Sep 28 2015 | Updated: Dec 04 2015
The following MartinLogan products feature WPS setup: Bravado Cadence Crescendo X Forte Motion Vision X Unison On an OSX computer Locate “Utilities” on your Apple computer. Open the “Airport Utility” app by double clicking. On the toolbar at the top...
Created: Sep 28 2015 | Updated: Aug 24 2018
There are three methods of discovering your wireless audio device: WPS (Wi-Fi Protected Setup) Access Point Hardwired with Ethernet WPS For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone. Wi-Fi...
Created: Sep 28 2015 | Updated: Aug 24 2018
This will reset your wireless audio device to factory settings and clear the network configuration. After a reset has been performed, there is no way to recover the previous user configured settings. Bravado, Forte, and Unison Press and hold the power button on your Bravado...
Created: Sep 28 2015 | Updated: Aug 24 2018
The information on this page pertains the following ARC compatible products Bravado Cadence Forte Unison Verse ARC Mobile (iOS) Download ARC Mobile from the iOS App Store Check to make sure you are running the latest version of firmware and that you Play-Fi...
Created: Aug 27 2019 | Updated: Aug 27 2019
Anthem Room Correction (ARC) can have an amazing impact on the sound of a wireless speaker. Most of the time it is not possible to place speakers in the best acoustic position. Corners, doors, windows, and other hard surfaces add distortions to the sound of your speakers and compromise...
Created: Sep 28 2015 | Updated: Aug 24 2018
Bravado Forte Unison ARC can be toggled on and off by pressing and holding the mute button for 5 seconds. Your wireless audio device will make an affirmative (high pitch) or negative (low pitch) tone to indicate if ARC is ON or OFF. Cadence Verse Using the...
Created: Sep 28 2015 | Updated: Aug 24 2018
The information on this page pertains the following ARC compatible products Bravado Cadence Forte Unison Verse Try the following: Make sure that your audio device has been successfully added to the network (using Wi-Fi or Ethernet) by playing an audio...
Created: Aug 27 2019 | Updated: Aug 27 2019
Try the following: Make sure the USB cable connects to both the microphone and the computer. Try disconnecting the USB microphone and trying another port on your computer. Make sure that your computer is not set to use a default microphone. You can check this in Windows...
Created: Aug 27 2019 | Updated: Aug 27 2019