risultati: 171 - 180 di 203
The Rename screen lets you assign a custom name to your subwoofer. This is useful if you have multiple subwoofer's in your system. A custom subwoofer name must be between 3–13 characters long.
Created: Jul 17 2018 | Updated: Aug 24 2018
The Reset screen lets you perform a factory reset on your subwoofer. A factory reset will restore all settings to their defaults. It will also erase any ARC corrections that have been uploaded to the subwoofer.
Created: Jul 17 2018 | Updated: Aug 24 2018
Multiple subwoofers all have same name in the Control App or ARC (app or computer software) Unplug all subwoofers. Plug the subs in one at a time and use the Subwoofer Control App to rename to each sub. Once you've given each subwoofer a custom name, plug them all back in. Use...
Created: Jul 17 2018 | Updated: Aug 24 2018
ARC Mobile not discovering subwoofer Make sure sub's Setting Control is set to "App". The is necessary for the duration of the ARC process, even if you intend to use the "Local" setting. Make sure nothing is connected to the sub's USB Input. Make sure the Subwoofer Control...
Created: Jul 17 2018 | Updated: Aug 24 2018
ARC (for computer) not recognizing the ARC microphone Unplug the microphone’s USB cable from your computer and plug it back into your computer. If your computer has more than one USB port try using a different USB port. While the microphone is plugged into your computer allow...
Created: Aug 27 2019 | Updated: Aug 27 2019
No. The MartinLogan Subwoofer Control App is only available for iOS and Android devices.
Created: Jul 17 2018 | Updated: Aug 24 2018
Use a USB cable to connect the subwoofer's USB Input (Micro-B USB) to a USB (Type A) input on your computer. Using ARC software (available from AnthemAV.com/ARC), choose your subwoofer when asked to select a device. The ARC software should automatically ask if you would like to install...
Created: Jul 17 2018 | Updated: Aug 24 2018
Receivers and processors with multiple subwoofer outputs usually output the same signal on both outputs. You can connect your subwoofer to either output. If your processor/receiver offers independint control of the inputs, connect your subwoofer to one output and use the receiver/processor's...
Created: Jul 17 2018 | Updated: Aug 24 2018
Your subwoofer is designed to connect to either 2-channel or multi-channel systems (or both) and offers connetions and controls for either scenario. Please review the "Connecting the Subwoofer and Setting Controls" section of the manual for details.
Created: Jul 17 2018 | Updated: Aug 24 2018
The Dynamo 600X, 800X, 1100X, and 1600X subwoofers have moved controls to a Subwoofer Control App (available for iOS or Android).
Created: Jul 17 2018 | Updated: Aug 24 2018