Setup and Configuration of Wireless Products

« Retour à la page Support Technique

How do I set my wireless audio device back to factory defaults and add it back to my network?

Created: Sep 28 2015 | Updated: Aug 24 2018

This will reset your wireless audio device to factory settings and clear the network configuration. After a reset has been performed, there is no way to recover the previous user configured settings.

Bravado, Forte, and Unison

• Press and hold the power button on your Bravado or Forte for 10 seconds. There will be two chimes indicating a factory reset. Release the button following the second chime. The LED will begin to flash rapidly indicating that the unit has begun the reset
• Once the Wi-Fi indicator LED begins to pulse slowly the unit is ready to be set up again.

Cadence and Verse

•  From the menu choose ‘Service> Factory Reset> At Home > Yes’. The soundbar will respond indicate a factory reset. Once complete, your soundbar will be reset to factory default home settings. 
• Once the Wi-Fi Setup and Status button begins to pulse slowly the unit is ready to be set up again.

Crescendo

• For approximately 5 seconds, insert a pin or other small object into the small hole above the “Reset” label on back of the speaker. The “Wi-Fi Setup and Status” LED will briefly turn green and then rapidly blink green for approximately fifteen seconds. 
• Once the “Wi-Fi Setup and Status” LED begins blinking slowly green the unit is ready to be set up again..

Crescendo X

• For 3 seconds or longer, insert a pin or other small object into the small hole above the “Reset” label on back of the speaker. There will be two chimes indicating a factory reset. Release the button following the second chime. The LED will begin to flash rapidly indicating that the unit has begun the reset.
• Once the “Wi-Fi Setup and Status” LED  begins to pulse slowly the unit is ready to be set up again.

Motion Vision X

•  From the menu choose ‘SERVCE > RESET > AT.HOME > CONFRM > YES’. The soundbar will respond with ‘RESETNG’ and there will be two chimes indicating a factory reset. Once complete, your soundbar will be reset to factory default home settings. 
• Once the Wi-Fi Setup and Status button  begins to pulse slowly the unit is ready to be set up again.