Monolith III

La potenza del suono

Il Monolito III stand alone. Potente. Imponente. Spingendoti in un mondo di armonia e purezza scoperto solo da pochi eletti.

Tutto è iniziato con questo progetto di speaker di riferimento. Sin dalla sua comparsa nel 1982, il Monolith ha rappresentato il punto di arrivo della tecnologia elettrostatica ML di livello di riferimento e di una ricerca approfondita e dinamica del guidatore, fornendo dinamismo, precisione e larghezza di banda paragonabili a qualsiasi fascia di prezzo. Questo sistema combina lussureggianti venature del legno e finiture in composito nero satinato in un armadietto straordinariamente bello, elegante come la riproduzione sonora da provare. Il Monolith III richiede l'aggiunta di un crossover esterno. È possibile scegliere il superbo Crosover Monolith IIIp passivo ($ 1000 al dettaglio negli Stati Uniti), o il crossover attivo Monolith IIIx (EXOS - $ 3500 USA al dettaglio).

Launched in 1990

Price when discontinued:
6.500,00 USD



Le specifiche sono soggette a modifiche senza preavviso

Risposta in frequenza

28-24.000 Hz ± 3dB

Potenza amplificatore consigliata

20-500 watt per canale

Dispersione orizzontale

30 °

Dispersione verticale

Sorgente di linea da 48 "(121,92 cm)


89 dB / 2,83 volt / metro


Passa alto IIIp: 4 Ohm, 1 a 20kHz
IIIp Low-pass: 4 Ohm
IIIx (Exos) High-pass: 47.000 Ohm
IIIx (Exos) Low-pass: 100 Ohm. Compatibile con amplificatori da 4, 6 o 8 Ohm.

Frequenza di crossover

III p .: 125 Hz. IIIx 125Hz 12 dB / ottava passa-basso, passa-alto 18 dB / ottava

Trasduttore ad alta frequenza

Trasduttore elettrostatico CLS ™ da 48 "(121,92 cm)

Trasduttore a bassa frequenza

Escursione alta da 30 cm (30,5 cm), cono estremamente leggero e ad alta rigidità con assemblaggio del driver di lancio esteso. Formato della camera di non risonanza.


Monolith III: lastre epossidiche di vetro, trasformatore audio avvolto su misura, condensatori in polipropilene, bobine di nucleo d'aria.

IIIp Passive Crossover: lastre epossidiche di vetro, condensatori in polipropilene, bobine di rame prive di ossigeno al 100%, resistori a filo avvolto.

IIIx (Exos) Crossover attivo: bardi epossidici di vetro, resistori a film metallico, condensatori in polipropilene, J-FET selezionati a mano, connettori di input / output TIFFANY.

Controlli audio

IIIx (Exos) Frequenza di crossover attiva: 30, 35, 40, 45, 50 Hz
IIIx (Exos) Active Crossover Boost / Cut: -4, -2, 0, +2, +4 dB


Morsetti a biforo a 5 vie placcati in oro da 30-amp


120 libbre (54,5 kg)


73,75 "× 26,75" × 11,75 "
(187,3 cm × 67,9 cm × 29,8 cm)

Prodotti compatibili

IIIp Passive Crossover, IIIx (Exos) Acticve Crossover

recensioni dei clienti Per Monolith III

per favore, registrati o Iscriviti aggiungere commenti.


  • mercoledì 12 novembre 2014

Oldie but a Real Goodie 4.6 stars
I purchased my Monolith IIIx,p in 1992. They were a floor demo, since the small dealer only has 1 pair! I received a decent discount since they were 1 year old at the time. I have both the passive and active crossovers. I now use Pass Labs X3 pre and X350.5 amp ('stats) and Parasound HCA2200 II amp (woofer). The ultra high quality passive crossover only requires one stereo amplifier to drive the speaker system but like ALL passive crossovers, it really gets in the way (slightly colors) the sound when directly compared to the awesome XOS electronic crossover (IIIx version) and using a pair of great SS amps. I was advised against using my beloved tube power amps due to their high Damping Factor which causes an obvious roll-off of high frequencies in the 'stat panels. For similar reasons, tubes usually do not promote tight bass. Anyway, since excellent, powerful and musical SS amps are abundant, why not? I have used a bi-amp configuration for over 15 years now. I also use a digital room bass correction system on the woofers only. Automatic room-speaker mode (peaks) correction really helps clean up the bass and make it much more crisp and defiend - and way less boomy. I have new Peerless aluminum 500W woofer cones also, this helps bass definition also. I also have new factory buit 'stat panel since about 2009. These were built to the latest standards and do sound better than the origonal panels. BTW, the panels will eventually (15+ years) lose volume (1-2dB) and high frequency extension, even if you keep them clean and dust free. So replace them if M-L still provides that service. The sound: overall, the sound using Pass X350.5 on the panels is awesome: big, clean, clear, tight, fast, musical, detailed, dead quiet background and very 3 dimensional. However, a small region the mid bass is still a tiny touch muddy and the highs above about 5kHz are a bit subdued - but still very clean. It's as if the cymbals and triangles are 10-15 feet farther away that the rest of the musicians. But vocal clarity and depth, or solo instruments, be it guitar, saxophone, piano or drums are just amazing - they float in front seamlessly in crystal clarity across from left to right in glorious and delightful 3 dimensions. Airy, effortless and realistic sound floats on the soundstage in front of and behind the actual speakers. Wow. As a minor owner of s hifi store (no names) for the last 30 years, I periodically bring home a pair of the latest (non electrostatic) speakers for a few days of "home demo". Invariable they go right back into the store demo stock. Electrostatics are magical even if they are not perfect in their ESL-to-woofer blending - they still beat the pants off of almost everything else. They spoil you too. The soundstage they present, the clarity is just addictive its so realistic. Tiny midranges and tweeters just cannot convey this sense of size and openness. The Monolith have one feature that the latter-day M-L designers simply missed is their separate speaker inputs for the raw woofer and for the electrostatic sections. Thus bi-amplification is possible. Active bi-amping is very desirable (implying the use of an electronic crossover and/or separate digital room-bass correction while the stats are driven with pure analog signals). Active bi-amping capability allows the User to try all sorts of individual control measures on both the woofer and separately, the 'stat panels - this opens up a whole new world now that digital speaker correction is becoming commonplace. In a few yearsa, audiophile grade full spectrum automatic digital control / speaker compensation will be possible, so even the 1992 Monoliths III can be made to sound as good as anything on the market. Almost twenty-five years on, a good condition used Monolith III system can cost you $3k, if you can find one. A new Summit pair is $15k. Is the Summit 5 times better?

Jeremy Searles

  • sabato 25 maggio 2013

Love all over again
I have had these Monoliths in my life for quite some time. First, they were my Uncles, but after his passing, I was graced with them. With the help of the customer service dept, I was able to change out the panels a little over a year ago. Since then, they sound like they did when new. The sound is so clear and pure. It's like listening to a song again for the first time so times. Currently I am using Harman Kardon amps. These speakers really bring vinyl to life. If you come across a set, worth a look. You won't be sorry.

Peter Yeanacopolis

  • giovedì 21 ottobre 2010

My Monoliths
I have owned my Monoliths since they came out in 1990 and have enjoyed them ever since. I originaly powered them with Macintosh pre-amp C22 and MA 75 and they sounded the best with tubes sending highs thoughout the room delivering all frequencys with utter clarity. I have since changed to Adcom Limited Edition matched amps and wish I stayed with Mac. I also use the Monolith IIIx active crossover which allows me to customize my listening and would not do without it. I have not heard the newer products offered by ML however with the correct cables, amps and pre-amp, (I use Transparent)these are what I continue to enjoy for thier reproduction capability.