Troubleshooting Subwoofers

« Вернуться на главную страницу поддержки

Troubleshooting Your Subwoofer

Created: Jul 17 2018 | Updated: Aug 24 2018

No Output

  • Check that all components are plugged in and turned on.
  • Check all interconnecting cables.
  • Check that the subwoofer is connected to the sub out (or other appropriate output) on the receiver/processor/amplifier.
  • Check that subwoofer output is enabled in the receiver/processor's setup menu.
  • Make sure the sub's level control is not turned down.
  • If the problem persists, contact your dealer.

Muddy Bass

  • Check placement. Try moving the subwoofer closer to the front and side walls.
  • Check the type of feet that are being used. If available, try installing the ETC spikes.
  • Decrease the volume level.
  • Check your processor setup.
  • If the problem persists, contact your dealer.

Hums or Unusual Sounds

  • Turn the subwoofer off, unplug all signal inputs, turn the subwoofer back on and turn up the level. If the problem disappears, the hum is originating elsewhere in your system.
  • Connect the sub to the same AC circuit as the receiver/processor.
  • If operating in wireless mode, move the sub away from microwave ovens and/or any devices that use wireless technology.
  • If the problem persists, contact your dealer.
     

Бескомпромиссная производительность. Непоколебимая точность. Непоколебимая надежность. Использование бесчисленных технических преимуществ электростатических принципов для воссоздания звука в его истинной форме - вот что такое MartinLogan.