Setup and Configuration of Wireless Products

« サポートホームに戻る

What is involved in setting up my wireless audio device?

Created: Aug 24 2018 | Updated: Aug 24 2018

Step One: The Play-Fi App

  • Download the Play-Fi app to your iOS or Android phone/tablet from either the Apple App Store, the Google Play Store, the Amazon store. If you are using a PC, download the Play-Fi app from the Play-Fi website.

Step Two: Your Wireless Network

  • The basis of a strong Play-Fi experience is a high quality wireless network
  • We recommend against using the modem/router combo provided by your ISP
  • Make sure your primary Play-Fi source (phone/tablet/PC) is connected to the network that you want the wireless system to join

Step Three: Your Wireless Audio Device

  • The process for connecting your wireless audio device to your network varies by device. Please refer to your product’s manual for specific setup documentation.

Step 4 (optional): Add a Sub

  • If you are planning on using a sub, connect it to your wireless audio device using an RCA subwoofer cable. Please note, the Motion Vision X also allows wireless connection of a compatible subwoofer.
  • Turn on the subwoofer output.
    • Bravado
      • These devices automatically detect that a sub is connected and adjust the internal crossovers accordingly.
    • Cadence
      • Subwoofer output must be turned on in the soundbar. If using a wired connection, use the menu to select “Subwoofer> Wired Sub”. If using a SWT-X wireless subwoofer connection, turn on output by selecting“Subwoofer > Wireless Subwoofer > Sync Subwoofer” and following the instructions that came with the SWT-X transmitter and receiver.
    • Crescendo
      • Turn on the subwoofer by pressing the Sub Out button on the back of the speaker.
    • Crescendo X
      • Turn on the subwoofer by pressing the Sub Out button on the back of the speaker.
    • Forte
      • These devices automatically detect that a sub is connected and adjust the internal crossovers accordingly.
    • Motion Vision X
      • Subwoofer output must be turned on. If using a wired connection, use the menu to select “SUB > WIRED”. If using a SWT-2 wireless subwoofer connection sync your wireless subwoofer and turn on output by selecting“SUB > WIRELS > SYNC”.
    • Verse
      • Subwoofer output must be turned on in the soundbar. If using a wired connection, use the menu to select “Subwoofer> Wired Sub”. If using a SWT-X wireless subwoofer connection, turn on output by selecting“Subwoofer > Wireless Subwoofer > Sync Subwoofer” and following the instructions that came with the SWT-X transmitter and receiver.

    Step 5 (optional): Run ARC [Bravado, Cadence, Forte, and Verse only]

    • If you are using a subwoofer, connect your sub prior to running ARC so that the sub is included in the room correction measurement
    • Download the latest version of ARC software.
    • Install ARC on your Windows PC.
    • Connect the included microphone to your PC or laptop using the provided USB cable
    • Open ARC and select the wireless audio device you want to run ARC on. The system will walk you through the steps.

妥協のないパフォーマンス明瞭な精度揺るぎない信頼性静電気の原理の無数の技術的な利点を利用して、真の形式で音を再現します。これがMartinLoganのすべてです。