Setup and Configuration of Electrostatic Speakers

« 回到支持主页

I read in my manual that to achieve good imaging my speakers should be toed in. How much should I toe them in?

Updated: Aug 24 2018

Generally it is found that the ideal listening position is with the speakers slightly toed-in so that you are listening to the inner third of the curved electrostatic transducer. A simple, yet effective method to achieve proper toe in involves sitting at the listening position, holding a flashlight under your chin and pointing it at each speaker. The reflection of the flashlight should be within the inner third of the electrostatic panel. Use this as a starting point and experiment by toeing in your speakers slightly less or slightly more. You will notice the tonal balance and imaging changing. You will notice that as the speakers are toed-out, the system becomes slightly brighter than when toed-in. This design gives you the flexibility to compensate for a soft or bright room.

不妥协的表现。不懈的准确性。坚定不移的可靠性。利用静电原理的无数技术优势,以最真实的形式重现声音 - 这就是MartinLogan的全部内容。