Sequel

Ascolta attentamente

Dalla prima nota alla fine, il Sequel vive l'esperienza musicale originale con una verità sorprendente.

Se la qualità è qualcosa che richiedi in tutto ciò che acquisti, il diffusore MartinLogan Sequel è stato progettato e costruito espressamente per deliziarti. Otto anni di ricerca e sviluppo sono andati a trovare la tecnologia in grado di produrre la ricreazione accurata e accurata dell'evento originale da un altoparlante di dimensioni tali da adattarsi allegramente nella maggior parte delle stanze. Dalla prima nota alla fine, il Sequel vive l'esperienza musicale originale con una verità sorprendente. In MartinLogan, la nostra dedizione alla ricerca della qualità ha reso in pochi anni il nostro altoparlante il più raffinato al mondo. Ascolta attentamente, e sentirai cosa intendiamo.

Launched in 1987

Price when discontinued:
2.495,00 USD

stampa

specificazioni

Le specifiche sono soggette a modifiche senza preavviso

Risposta in frequenza

28-24.000 Hz ± 2 dB

Potenza amplificatore consigliata

20-400 watt per canale

Dispersione orizzontale

30 °

Dispersione verticale

Sorgente di linea da 48 "(121,92 cm)

sensibilità

88 dB watt / metro

Frequenza di crossover

125 Hz centro. 6 dB per ottava, fase coerente, prima ottava. 12 dB per ottava successivamente.

Trasduttore ad alta frequenza

Trasduttore elettrostatico CLS ™ da 48 "(121,92 cm)

Trasduttore a bassa frequenza

10 "(25,4 cm) escursione elevata, cono superleggero ad alta rigidità con gruppo a doppio magnete impilato, profilo magnetico conico elettricamente, bobina senza fili.

componenti

Bobine di rame prive di ossigeno al 100%, condensatori di bypass in polipropilene

ingressi

Binding bifilare a 5 vie

Peso

110 libbre. (50 kg)

Dimensioni

71,5 "× 14" × 13 "
(181,6 cm × 35,6 cm × 33 cm)

recensioni dei clienti Per Sequel

per favore, registrati o Iscriviti aggiungere commenti.

TomDac

  • venerdì 15 novembre 2013

My first speakers
I walked into an MartinLogan dealer in 1987 and my life changed forever. The open and clear MartinLogan sound won me over in an instant and I bought a pair of Sequels, which had just been introduced. They brought me countless hours of enjoyment and astounded me with their imaging and clarity with ALL kinds of music. I love how they just "disappear" when you've got them set up properly and are sitting in the sweet spot. 17 years later and countless moves and equipment upgrades, I sold them and got a pair of bigger Logans! To me, nothing else will do...

Nathan

  • mercoledì 12 settembre 2012

Best speakers I've owned
I purchased the Sequels on October, 1988 and have never, ever regretted buying them. They've sounded perfect since they broke in. Throughout the years, though, the sound did diminish and the woofers deteriorated. I replaced the panels and woofers when ML still offered them and they sound as new as when I took them out of the box. I don't imagine ever changing speakers except if I get a pair of CLX to replace them.

E. Rob

  • domenica 29 aprile 2012

Sound
All I can say is, ALLLLLLL MYYYYYYY GOD. Just got a pair used to replace my DQ 10s.. I am a audio inthusiast and thought nothing could sound as good as my DQ10s, boy was I mistaken.. Music sound like you are right there. No need for surround they do it all. They fill the whole room with music not just play it. Again unbelieveabe.. Thanks Martin Logan

Ralph

  • lunedì 22 agosto 2011

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • lunedì 22 agosto 2011

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • lunedì 22 agosto 2011

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.