Sequel

仔细听

从第一张纸到最后一张,续集以惊人的真理生活着原始的音乐体验。

如果您购买的所有产品都符合您的要求,那么MartinLogan Sequel扬声器的设计和制造都是为了让您高兴。经过八年的研究和开发,人们开始寻找能够通过扬声器产生原始事件的最终精确再现的技术,以便在大多数房间中快乐地适应。从第一张纸到最后一张,续集以惊人的真理生活着原始的音乐体验。在MartinLogan,我们致力于追求品质,在短短几年内,我们的扬声器成为世界上最好的。仔细听,你会听到我们的意思。

Launched in 1987

Price when discontinued:
US$2,495.00

产品规格

规格如有更改,恕不另行通知

频率响应

28-24,000 Hz±2dB

推荐的放大器功率

每通道20-400瓦

水平分散

30°

垂直分散

48英寸(121.92厘米)线源

灵敏度

88dB瓦特/米

交叉频率

125赫兹中心。每倍频程6dB,相位相干,第一个八度音阶。此后每个八度音程12 dB。

高频传感器

48英寸(121.92厘米)CLS™静电传感器

低频传感器

10英寸(25.4厘米)高偏移,超轻,高刚性锥体,带双层叠磁铁组件。电锥形磁性轮廓,无伺服音圈。

组件

100%无氧铜线圈,聚丙烯旁路电容器

输入

5路双线接线柱

重量

110磅(50公斤)

外形尺寸

71.5“×14”×13“
(181.6厘米×35.6厘米×33厘米)

顾客评论 对于 Sequel

请, 登入 要么 注册 添加评论.

TomDac

  • 2013年11月15日星期五

My first speakers
I walked into an MartinLogan dealer in 1987 and my life changed forever. The open and clear MartinLogan sound won me over in an instant and I bought a pair of Sequels, which had just been introduced. They brought me countless hours of enjoyment and astounded me with their imaging and clarity with ALL kinds of music. I love how they just "disappear" when you've got them set up properly and are sitting in the sweet spot. 17 years later and countless moves and equipment upgrades, I sold them and got a pair of bigger Logans! To me, nothing else will do...

Nathan

  • 2012年9月12日星期三

Best speakers I've owned
I purchased the Sequels on October, 1988 and have never, ever regretted buying them. They've sounded perfect since they broke in. Throughout the years, though, the sound did diminish and the woofers deteriorated. I replaced the panels and woofers when ML still offered them and they sound as new as when I took them out of the box. I don't imagine ever changing speakers except if I get a pair of CLX to replace them.

E. Rob

  • 2012年4月29日星期日

Sound
All I can say is, ALLLLLLL MYYYYYYY GOD. Just got a pair used to replace my DQ 10s.. I am a audio inthusiast and thought nothing could sound as good as my DQ10s, boy was I mistaken.. Music sound like you are right there. No need for surround they do it all. They fill the whole room with music not just play it. Again unbelieveabe.. Thanks Martin Logan

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.