Sequel

仔細聽

從第一張紙到最後一張,續集以驚人的真理生活著原始的音樂體驗。

如果您購買的所有產品都符合您的要求,那麼MartinLogan Sequel揚聲器的設計和製造都是為了讓您高興。經過八年的研究和開發,人們開始尋找能夠通過揚聲器產生原始事件的最終精確再現的技術,以便在大多數房間中快樂地適應。從第一張紙到最後一張,續集以驚人的真理生活著原始的音樂體驗。在MartinLogan,我們致力於追求品質,在短短幾年內,我們的揚聲器成為世界上最好的。仔細聽,你會聽到我們的意思。

Launched in 1987

Price when discontinued:
US$2,495.00

產品規格

規格如有更改,恕不另行通知

頻率響應

28-24,000 Hz±2dB

推薦的放大器功率

每通道20-400瓦

水平分散

30°

垂直分散

48英寸(121.92厘米)線源

靈敏度

88dB瓦特/米

交叉頻率

125赫茲中心。每倍頻程6dB,相位相干,第一個八度音階。此後每個八度音程12 dB。

高頻傳感器

48英寸(121.92厘米)CLS™靜電傳感器

低頻傳感器

10英寸(25.4厘米)高偏移,超輕,高剛性錐體,帶雙層疊磁鐵組件。電錐形磁性輪廓,無伺服音圈。

組件

100%無氧銅線圈,聚丙烯旁路電容器

輸入

5路雙線接線柱

重量

110磅(50公斤)

外形尺寸

71.5“×14”×13“
(181.6厘米×35.6厘米×33厘米)

顧客評論 對於 Sequel

請, 登入 要么 註冊 添加評論.

TomDac

  • 2013年11月15日星期五

My first speakers
I walked into an MartinLogan dealer in 1987 and my life changed forever. The open and clear MartinLogan sound won me over in an instant and I bought a pair of Sequels, which had just been introduced. They brought me countless hours of enjoyment and astounded me with their imaging and clarity with ALL kinds of music. I love how they just "disappear" when you've got them set up properly and are sitting in the sweet spot. 17 years later and countless moves and equipment upgrades, I sold them and got a pair of bigger Logans! To me, nothing else will do...

Nathan

  • 2012年9月12日星期三

Best speakers I've owned
I purchased the Sequels on October, 1988 and have never, ever regretted buying them. They've sounded perfect since they broke in. Throughout the years, though, the sound did diminish and the woofers deteriorated. I replaced the panels and woofers when ML still offered them and they sound as new as when I took them out of the box. I don't imagine ever changing speakers except if I get a pair of CLX to replace them.

E. Rob

  • 2012年4月29日星期日

Sound
All I can say is, ALLLLLLL MYYYYYYY GOD. Just got a pair used to replace my DQ 10s.. I am a audio inthusiast and thought nothing could sound as good as my DQ10s, boy was I mistaken.. Music sound like you are right there. No need for surround they do it all. They fill the whole room with music not just play it. Again unbelieveabe.. Thanks Martin Logan

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.

Ralph

  • 2011年8月22日星期一

Twenty Three Years of True Musical Satisfaction
I bought the original Sequels back in April of 1988 and would never think of replacing them. They are simply so CORRECT in timbre, imaging, and definition that I cannot any other transducer equalling, let alone surpassing, them. Of course, they must be driven by only the best equipment, as any flaw in the audio chain will be revealed. Although not specified, ML has stated that they are 4 ohm impedence speakers, which will make a difference if vacuum tube amplifiers with selectable output taps are used. I have them powered by both tube and transistor, and unequivocally prefer tubes, but be sure and use a power amplifier whose output impedence is less than 0.5 ohms, to avoid a high-frequency rolloff.