Setup and Configuration of Wireless Products

« Вернуться на главную страницу поддержки

How do I put my wireless audio device into discovery mode?

Created: Sep 28 2015 | Updated: Aug 24 2018

There are three methods of discovering your wireless audio device: 

• WPS (Wi-Fi Protected Setup)
• Access Point
• Hardwired with Ethernet

WPS

• For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone.
• Wi-Fi Status indicator will blink twice in continuous intervals to indicate WPS mode.

Access Point

• For 8 seconds, press the device’s Wi-Fi Setup button until you hear two tones. Release the button after the second tone.
• After 20 seconds, the Wi-Fi Status LED will begin pulsing slowly to indicate Access Point mode is ready.

Ethernet

• Turn off your wireless audio device.
• Connect your wireless audio device to your router using an Ethernet cable.
• Turn on your wireless audio device.
• After booting, the Wi-fi Status LED will turn off to indicate a hardwired connection.