During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email service@martinlogan.com and sales@martinlogan.com for sales inquiries. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

Setup and Configuration of Wireless Products

« 回到支持主頁

How do I put my wireless audio device into discovery mode?

Created: Sep 28 2015 | Updated: Aug 24 2018

There are three methods of discovering your wireless audio device: 

  • WPS (Wi-Fi Protected Setup)
  • Access Point
  • Hardwired with Ethernet

WPS

  • For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone.
  • Wi-Fi Status indicator will blink twice in continuous intervals to indicate WPS mode.

Access Point

  • For 8 seconds, press the device’s Wi-Fi Setup button until you hear two tones. Release the button after the second tone.
  • After 20 seconds, the Wi-Fi Status LED will begin pulsing slowly to indicate Access Point mode is ready.

Ethernet

  • Turn off your wireless audio device.
  • Connect your wireless audio device to your router using an Ethernet cable.
  • Turn on your wireless audio device.
  • After booting, the Wi-fi Status LED will turn off to indicate a hardwired connection.

 

不妥協的表現。不懈的準確性。堅定不移的可靠性。利用靜電原理的無數技術優勢,以最真實的形式重現聲音 - 這就是MartinLogan的全部內容。