Setup and Configuration of Wireless Products

« Back to Support Home

How do I put my wireless audio device into discovery mode?

Created: Sep 28 2015 | Updated: Aug 24 2018

There are three methods of discovering your wireless audio device: 

  • WPS (Wi-Fi Protected Setup)
  • Access Point
  • Hardwired with Ethernet

WPS

  • For 3 seconds, press the device’s Wi-Fi Setup button until you hear a tone. Release the button after the first tone.
  • Wi-Fi Status indicator will blink twice in continuous intervals to indicate WPS mode.

Access Point

  • For 8 seconds, press the device’s Wi-Fi Setup button until you hear two tones. Release the button after the second tone.
  • After 20 seconds, the Wi-Fi Status LED will begin pulsing slowly to indicate Access Point mode is ready.

Ethernet

  • Turn off your wireless audio device.
  • Connect your wireless audio device to your router using an Ethernet cable.
  • Turn on your wireless audio device.
  • After booting, the Wi-fi Status LED will turn off to indicate a hardwired connection.

 

Uncompromising performance. Unflinching accuracy. Unwavering reliability. Harnessing the myriad technical advantages of electrostatic principles to recreate sound in its truest form—this is what MartinLogan is all about.