During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email service@martinlogan.com and sales@martinlogan.com for sales inquiries. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

Features and General Questions for Wireless Products

« Back to Support Home

Can I connect a subwoofer?

Created: Sep 28 2015 | Updated: Aug 24 2018

Every MartinLogan wireless audio device (with the exception of Unison) has a dedicated sub-out connection using a standard RCA connection. The Vision X also supports wireless subwoofer connections to compatible SWT-2 wireless subwoofers. The Cadence and Verse supports wireless subwofoer connections with the included SWT-X wireless receiver.

  • If you are planning on using a sub, connect it to your wireless audio device using an RCA subwoofer cable. Please note, the Motion Vision X,Cadence, and Verse also allow wireless connection.
  • Turn on the subwoofer output.
    • Bravado
      • These devices automatically detect that a sub is connected and adjust the internal crossovers accordingly.
    • Cadence
      • Subwoofer output must be turned on in the soundbar. If using a wired connection, use the menu to select “Subwoofer> Wired Sub”. If using a SWT-X wireless subwoofer connection, turn on output by selecting“Subwoofer > Wireless Subwoofer > Sync Subwoofer” and following the instructions that came with the SWT-X transmitter and receiver.
    • Crescendo
      • Turn on the subwoofer by pressing the Sub Out button on the back of the speaker.
    • Crescendo X
      • Turn on the subwoofer by pressing the Sub Out button on the back of the speaker.
    • Forte
      • These devices automatically detect that a sub is connected and adjust the internal crossovers accordingly.
    • Motion Vision and Motion Vision X
      • Subwoofer output must be turned on. If using a wired connection, use the menu to select “SUB > WIRED”. If using a SWT-2 wireless subwoofer connection sync your wireless subwoofer and turn on output by selecting“SUB > WIRELS > SYNC”.
    • Verse
      • Subwoofer output must be turned on in the soundbar. If using a wired connection, use the menu to select “Subwoofer> Wired Sub”. If using a SWT-X wireless subwoofer connection, turn on output by selecting“Subwoofer > Wireless Subwoofer > Sync Subwoofer” and following the instructions that came with the SWT-X transmitter and receiver.

Uncompromising performance. Unflinching accuracy. Unwavering reliability. Harnessing the myriad technical advantages of electrostatic principles to recreate sound in its truest form—this is what MartinLogan is all about.