Results: 11 - 20 of 203
Your MartinLogan wireless audio device is controlled by the Play-Fi app on your phone/tablet. Open the Play-Fi app and select the wireless audio device (or group of devices) you want to stream music to. In the “Select Your Music” panel, select “Music”. You will now be able...
Created: Sep 28 2015 | Updated: Aug 24 2018
Make sure your NAS (Network Attached Storage) device is connected to the network and powered on. Many NAS drives have software that come with them in order to set them up. Run any included software and make sure that the folder you want the MartinLogan wireless audio system to see...
Created: Sep 28 2015 | Updated: Aug 24 2018
Windows PC Windows PC (using DTS Play-Fi) Download the Play-Fi PC app from the DTS website. Once it is installed you will be able to select a Play-Fi compatible device as the audio end point for your PC. Now, sounds from your PC will be played through your...
Created: Sep 28 2015 | Updated: Sep 26 2018
Verify your wireless network is functioning correctly. You may need to restart your router. If the Wi-Fi Status light is solid (indicating a connection): Try restarting the app. On iOS and Android this is done by double clicking the home button to show currently...
Created: Sep 28 2015 | Updated: Aug 24 2018
Check that your device is powered on. Verify the network connection has not been lost. Verify that your mobile device or PC and your wireless product are connected to the same network. Verify that other wireless devices are able to connect to your router and Wi-Fi/internet...
Created: Sep 28 2015 | Updated: Aug 24 2018
It is likely that the wireless network strength is low at the location of the wireless audio device, or there is something causing interference. Make sure the wireless audio device is positioned away from home telephones and base stations as well as Bluetooth and devices like Wi-Fi...
Created: Sep 28 2015 | Updated: Aug 24 2018
Analog In The Bravado has left and right stereo inputs by way of a 3.5mm stereo (headphone style) plug. Just plug in an external device and change the input using the source button (should turn blue). If you press and hold the source button on your Bravado for 10 seconds...
Created: Sep 28 2015 | Updated: Aug 24 2018
There are several methods for connecting your wireless audio device to your network. These include Access Point, WPS (Wi-Fi Protected Setup), and wired setup. Additionally, each setup process is slightly different depending on the device (iOS/Android/PC) which you are using to set...
Created: Oct 10 2018 | Updated: Oct 10 2018
A good wireless network is the foundation of a high performance wireless audio system. A good wireless network will help not only with the performance of wireless audio systems, but also all your other network connected devices. The steps to set up a network will vary depending on...
Created: Sep 28 2015 | Updated: Aug 24 2018
Most likely the wireless audio device is still looking for your old network and will need to be setup on the new router. Place the device is setup mode using either WPS or Access Point setup mode and follow the normal setup procedure.
Created: Sep 28 2015 | Updated: Aug 24 2018