Folded Motion Speakers (Motion and ElectroMotion Series)

Features and General Questions for Folded Motion Speakers:

• What size (power) of an amplifier should I use?

  The power amplifier is one of the most important elements in any A/V system, as too little power will not allow your system to live up to its full potential. In general, we recommend an amplifier with 100 to 200 watts per channel for most applications. Probably less would be adequate...

  Updated: Aug 24 2018

• Will amplifiers rated at 6 or 8 ohms work with MartinLogan speakers?

  All MartinLogan speakers are compatible with receivers rated at 4, 6 or 8 ohms. We have tested several mainstream, high quality receivers and have found all are more than capable of driving 4 ohm speakers. The limitations of an amplifier rated at 6 or 8 ohms only becomes obvious at...

  Updated: Aug 24 2018

• How do I clean my speakers?

  Use a dust free cloth or a soft brush to clean your speakers and subwoofers. If your speaker (CLX or CLX Art only) features EcoSound, please refer to the following FAQ. To clean the electrostatic panel, you can vacuum them as explained here.

  Created: Jan 01 2013 | Updated: Aug 24 2018

• Will exposure to sunlight affect the life or performance of my speakers?

  We recommend that you not place any loudspeaker in direct sunlight. The ultraviolet (UV) rays from the sun can cause deterioration of grill cloth, speaker cones, etc. Small exposures to UV will not cause a problem. In general, the filtering of UV rays through glass will greatly reduce...

  Updated: Aug 24 2018

• Can you suggest a list of speaker cables that will be ideal for MartinLogan speakers?

  Many people are surprised to hear that speaker cables and component interconnects can have a significant impact on the quality of sound. Just as with the amplifiers, there are many types and designs of cables to choose from and we haven't had the opportunity to extensively test them...

  Updated: Aug 24 2018

• Could you suggest a list of power amplifiers and components that will be ideal for MartinLogan speakers?

  With numerous excellent amplifiers available and the list growing practically each day, we can't recommend one amp over another simply because we haven't had the opportunity to audition them all. This is also true of each component in your A/V system. There are many great components...

  Updated: Aug 24 2018

• Do MartinLogan speakers require big or expensive amplifiers?

  Absolutely not. MartinLogan speakers are quite efficient and are typically capable of providing from 89-91 dB output from only 2.83 volts of input (please refer to specific product specifications). This makes them suitable for use with a wide range of discrete and integrated amps,...

  Updated: Aug 24 2018

• Could you suggest a list of suitable electronics and cables ideal for MartinLogan speakers?

  We have no favorites and use electronics and cables quite interchangeably. We would suggest listening to a number of brands—and above all else—trust your ears. Dealers are always the best source for information when purchasing additional audio equipment. With regards to routers,...

  Created: Dec 04 2015 | Updated: Aug 24 2018

• Folded Motion Tweeter Technology

  

  Folded Motion is our thin film technology that allows us to develop products for applications where an electrostatic speaker might not be practical (because of size or placement constraints) while still delivering MartinLogan's signature high performance sound experience.

  Created: Aug 24 2018 | Updated: Aug 24 2018

• Should I unplug my speakers and subwoofers during a thunderstorm?

  Yes. Or before if possible. As with any high quality audio component it is always a good practice during stormy weather.

  Updated: Aug 24 2018

• I've heard that MartinLogan speakers are hybrid speakers. What is a hybrid speaker?

  That is correct. Nearly every MartinLogan speaker is a hybrid design. This means that they use both thin film and dynamic transducers to achieve maximum detail, imaging, and dynamic range. MartinLogan hybrid loudspeakers seamlessly fuse curvilinear line source electrostatic transducers...

  Updated: Aug 24 2018

• Is there likely to be any interaction between my speakers and the television in my audio/video system?

  With modern flat-panel televisions this is not an issue. If using an older CRT television we recommend 3 feet between a speaker and video components that are susceptible to magnetic fields.

  Updated: Aug 24 2018