During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email service@martinlogan.com and sales@martinlogan.com for sales inquiries. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

Troubleshooting Wireless Products

« Back to Support Home

No output from the wireless audio device.

Created: Dec 07 2015 | Updated: Mar 20 2018

  • Check that the speaker is turned on and not in standby mode.
  • Check that the speaker is not muted.
  • Check that the speaker’s volume is not turned all the way down.
  • Check the speaker is set to the proper input.
  • Check that your source component is turned on and source material is playing.
  • Turn the wireless audio device off using the power button. Wait thirty seconds and turn the speaker back on.
  • Unplug the speaker, wait thirty seconds, plug it back in, and turn the speaker back on.
  • Check that all interconnecting cables are connected at both ends. If necessary, try connecting an alternate audio source component to make sure the original source component isn’t the problem.
  • If necessary, try connecting an alternate source component to make sure the original source component isn’t the problem.

 

 

Uncompromising performance. Unflinching accuracy. Unwavering reliability. Harnessing the myriad technical advantages of electrostatic principles to recreate sound in its truest form—this is what MartinLogan is all about.